Ningbo Junda Machinery Manufacturing - Advantages of Nuts

The scope of nuts is gradually expanding, especially in aircraft, automobiles, trains, railways, ships, and other threaded technologies that are gradually entering the market. Construction, machinery, petroleum, agricultural machinery, electricity, military industry, medical equipment and many other fields.

1. Wear resistance and cutting resistance: The 30 ° slope at the bottom of the nut thread ensures that the locking force of the nut is evenly distributed on all threads of each tooth. Because the pressure distribution on the surface of each tooth's thread is evenly distributed, nuts can more effectively solve the problems of thread damage and cutting deformation.

2. Excellent vibration resistance: After tightening the screw, the thread of the anchor bolt is firmly inserted into the 30 ° wedge angle of the nut and clamped, and the normal force formed on the wedge angle is as follows. Vino. It is the same as increasing the normal force on a curved slope. The centerline of the anchor bolt forms a 60 ° angle instead of a 30 ° angle, resulting in a much higher normal force when tightening the nut. Standardized nuts with good fastening and shock-absorbing properties.

3. Good reusability. If the dosage is high, even if the nut is constantly tightened and disassembled, the locking force will not decrease, and the previous locking effect can be maintained. Anti loosening nuts have good corrosion resistance and cutting resistance. The bottom end of the thread of the anti loosening nut is skewed by 30 degrees, so there is a working pressure on each thread, so the locking force of the nut is evenly distributed on any tooth thread. Because the surface is evenly distributed, the anti loosening nut can more effectively solve the problems of screw damage and cutting deformation.